Dealing With A Sewage Backup In Your Home? 3 Steps To Prevent A Repeat Occurrence

Posted on

If you've recently experienced a sewage backup from your main sewer line, you want to make sure it doesn't happen again. The last thing you want is to clean raw sewage out of your home again. Luckily, there are some things you can do to reduce the chances of it happening again. Here are three steps you can take to prevent a repeat sewage backup into your home.

Have Your Drains Cleaned

If you've had raw sewage back up into your home, you need to have your drains cleaned. Cleaning your drains will help remove the residual sewage that might have dried up inside the pipes. If that residual sewage remains in the drains, it could lead to future clogs, which would increase the likelihood of repeat sewage backups. Not only that, but having your drains cleaned will also remove tree roots that might be growing inside your pipes. You might not realize this, but tree roots are a common cause of stubborn clogs, drain damage, and sewage backups that stem from the main sewer line. Drain cleaning will alleviate those problems.

Keep the Drains Flowing

If you've got a few drains in your house that you don't use very often, such as the guest bathroom toilet and sink, you need to flush them out at least once a month. Dry drains can lead to gas buildup, which can interfere with the proper flow of waste from your home. Not only that, but dry drains can also encourage clogs caused by hair and oils. To keep your drains flowing smoothly, and prevent sewage backups, flush your drains with hot water once a month. For maximum protection, pour a cup up baking soda in to the drains, followed by a cup of vinegar. Allow the solution to foam for about 15 minutes, and then flush with hot water. The foaming action will clean your drains, and the hot water will flush the debris through to the sewer.

Install a Backwater Valve

If you have an older home, your plumbing might not be protected with a backwater valve. This valve is designed to stop water from flowing backwards into your home. Unfortunately, most older homes don't have this valve installed on their drains. If your home isn't equipped with one, you need to contact a plumber near you, such as Bishop Plumbing, Heating and Cooling, Inc. Your plumber will be able to install the backwater valve, which will prevent future sewage backups.